Gasket NBR DN250 PN16 2mm

• size: DN250
• pressure rating: PN16
• thickness: 2mm
• material: oil-resistant NBR sheet made of vulcanized rubber compound
• temperature range: -40°C to +100°C
• advantages: good resistance to oils, greases, hydraulic fluids, and aliphatic hydrocarbons. Good compatibility with propane, butane, alcohols, and aqueous salt solutions.
• limitations: not recommended for use with esters, glycol, benzene, or chlorinated hydrocarbons
• application: industrial static sealing, production of gaskets and O-rings, tyres, inner tubes, bumpers, hoses for liquid fuels and oils, automotive industry, petrochemical industry

Information about Gasket NBR DN250 PN16 2mm

NBR is an oil-resistant sheet made of vulcanized rubber compound.

• option: without reinforcement; reinforced with 1 or 2 inserts
• thickness: 1–12mm
• color: black
• temperature range: -40°C to +100°C
• advantage: good resistance to oils, greases, hydraulic fluids, and aliphatic hydrocarbons. Good compatibility with propane, butane, alcohols, and aqueous salt solutions.
• limitations: not recommended for use with esters, glycol, benzene, or chlorinated hydrocarbons
• application: industrial static sealing, production of gaskets and O-rings, tyres, inner tubes, bumpers, hoses for liquid fuels and oils, automotive industry, petrochemical industry

Custom Cutting Available

• according to EN1514-1, EN12560-1, ASME B16.20, DIN2690
• according to the customer's technical documentation
• TG gaskets – flat gaskets for raised face and recessed flanges PN-86/H-74374/03
• SR gaskets – flat gaskets for tongue and groove flanges PN-86/H-74374/04
• IBC gaskets – flat gaskets for flat face flanges PN-86/H-74374/02
• full dimensional range, including gaskets of any shape
• large segmented gaskets (puzzle type)
• lead time: 2–5 days

How to Install the Gasket

1. Check that the gasket is the correct size and material.
2. Check that the gasket has no damage.
3. Check that the flanges are not distorted.
4. Remove all dirt from the flange surfaces and fastening components such as bolts, nuts, and washers.
5. Align the flanges and bolt holes.
6. Carefully insert the gasket between the flanges.
7. Centre the gasket between the flanges.
8. Do not use sealing compounds.
9. Tighten the flanges, making sure the gasket is not over-compressed or damaged.

For more information about gaskets, you can find it here>> 

We offer a wide range of seals and O-rings. If you have any questions, please contact us. Our email: biuro@polberis.pl, phone: 0048632614202. We will prepare an offer for you.